pacific standard times
 
 
all orders are secure |
|
|
Apexi AVC Type R Boost Controller
The AVC-R is a digital boost controller that allows the user to modify the boost pressure level on turbocharged vehicles. While there are many boost controllers on the market, none of the other includes as many features as the AVC-R, period. Despite all of the complex features included the unit, the AVC-R is flexible enough to be used by beginners. Entry level users need only to input a desired boost level and the AVC-R's trademark self learning CPU processor does the rest.The AVC-R also uses a highly durable, fast action solenoid valve to physically control the boost . The valve movement (Boost Duty Cycle) can also be modified. Raising the duty cycle increases boost response, while lowering the duty cycle will slow boost response. This feature allows boost response adjustment for varying turbo sizes. Since larger turbos take longer to spool up ( bad low end response) the duty cycle should be raised under lower RPM's for better response.
|
| Application |
Part Number |
| AVC Type-R Boost Controller | 420-A904 |
| AVC Type-R Boost Controller, Black | 420-X905 |
|
Apexi Auto Timer
The Apex Auto Timer allows the vehicle to idle for a preset amount of time after the ignition key has been removed. In turbocharged vehicles this prevents hot oil in the engine from coking up in the lines. Hard driving can raise engine oil temperatures to dangerously high levels. Proper cool down is essential for a healthy turbo and engine.The Auto Timer stands as a technological marvel. The pen shaped, compact size makes the Auto Timer one of the smallest turbo timers on the market. This allows a clean and stylish installation virtually anywhere inside the car. The unique multi angle joystick button allows easy navigation through the many feature menus. Upgraded in every way from the previous model, the new Auto Timer can automatically determine the necessary amount of after idling time. A Manual Mode allows the user to preset desired idling times from 0 sec.~10 minutes in 16 increments.
|
|
Apexi Rev Speed Meter GP
The new Rev/Speed Meter GP is a complete multi function measuring device designed to measure and monitor data such as vehicle speed, engine RPM, and elapsed times. However, the strength of the new unit lies in its differences. Probably the most obvious being its completely redesigned look. This new aesthetically pleasing model was crafted to match the likes of other highly popular A'PEX electronics such as the VAFC (VTEC Controller) and the AVCR (Boost Controller). The new screen utilizes the easy to read VFD (Vacuum Fluorescent Display) with built in light sensor used in many of A'PEX's line up.The new unit also delivers a host of new functions. Standard features include: Engine RPM, Vehicle Speed, Travel Distance, and Battery Voltage (All which can be displayed in real time graph mode, numerical mode, or analogue mode; 1-4 channels at a time.), Peak Hold, Replay (With 60 second playback.), Speed Limiter Cut, 0-100m, 200m, 400m times with trap speed, 0-100km/h, 200km/h, 300km/h times, 100km/h, 200km/h, 300km, etc.
|
| Application |
Part Number |
| Rev Speed Meter GP | 405-A912 |
| Rev Speed Meter GP, Black | 405-A916 |
|
Apexi EL II System Meters
The EL II System Meters are the newest addition to the EL Meters lineup. The 60mm System Meters utilize a main control unit which constantly monitors the movement of all of the gauges. The control unit can activate the memory replay, warning, and peak hold functions with just one touch. The synchronized memory playback function was designed exclusively so that drivers did not need to individually start each meter before a race. A high speed CPU processor ensures accurate monitoring every time.The main control unit can accommodate up to 6 meters. This gives the user unprecedented flexibility to decide what type of meter to add and how many. All meters come with a multi angle stand to allow easy reading from any vantage point. Since the main processor is not inside of the meter itself, A'PEXi engineers were able to slim down the meter casing so that it can be mounted virtually anywhere inside the cabin. The high speed control unit processor also eliminates excess wires between the meter and unit. |
| Application |
Part Number |
| Meter Control Unit | 403-A053 |
| Boost KPA Black | 403-A954 |
| Boost KPA Black *Black Bezel | 403-A954-0 |
| Boost KPA White | 403-A955 |
| Boost KPA White *Black Bezel | 403-A955-0 |
| Oil Temp Black | 403-A956 |
| Oil Temp Black *Black Bezel | 403-A956-0 |
| Oil Temp White | 403-A957 |
| Oil Temp White *Black Bezel | 403-A957-0 |
| Water Temp Black | 403-A958 |
| Water Temp Black *Black Bezel | 403-A958-0 |
| Water Temp White | 403-A959 |
| Water Temp White *Black Bezel | 403-A959-0 |
| Exhaust Gas Temp (EGT) Black | 403-A960 |
| Exhaust Gas Temp (EGT) Black *Black Bezel | 403-A960-0 |
| Exhaust Gas Temp (EGT) White | 403-A961 |
| Exhaust Gas Temp (EGT) White *Black Bezel | 403-A961-0 |
| Oil Pressure Black | 403-A962 |
| Oil Pressure Black *Black Bezel | 403-A962-0 |
| Oil Pressure White | 403-A963 |
| Oil Pressure White *Black Bezel | 403-A963-0 |
| Fuel Pressure Black | 403-A964 |
| Fuel Pressure Black *Black Bezel | 403-A964-0 |
| Fuel Pressure White | 403-A965 |
| Fuel Pressure White *Black Bezel | 403-A965-0 |
| Mechanical Boost KPA Black (Does not use Control Box) | 403-A968 |
| Mechanical Boost KPA Black (Does not use Control Box) *Black Bezel | 403-A968-0 |
| Mechanical Boost KPA White (Does not use Control Box) | 403-A969 |
| Mechanical Boost KPA White (Does not use Control Box) *Black Bezel | 403-A969-0 |
| Mechanical Boost PSI Black (Does not use Control Box) | 403-A970 |
| Mechanical Boost PSI Black (Does not use Control Box) *Black Bezel | 403-A970-0 |
| Mechanical Boost PSI White (Does not use Control Box) | 403-A971 |
| Mechanical Boost PSI White (Does not use Control Box) *Black Bezel | 403-A971-0 |
| Mechanical Vacuum, Blk. | 403-A976 |
| Mechanical Vacuun, Wht | 403-A977 |
| Oil Temp. Sensor Adapter Mazda/Mitsubishi | 403-X001 |
| Oil Temp. Sensor Adapter Subaru/Isuzu | 403-X002 |
| Oil Temp. Sensor Adapter M16P1.25 | 403-X003 |
|
Apexi i-Moni
The i-Moni is a simple plug-and-play monitoring device which instantly installs using any factory ISO 14320 OBD II diagnostic port. The i-Moni offers real time data display of up to four different parameters including: Engine RPM, Water Temperature, Intake Air Temperature, and Vehicle Speed. Since the i-Moni utilizes information drawn from the stock sensors, there is no need for costly and time consuming aftermarket sensors. Simply plug in the i-Moni to any ISO 14320 OBD II port and instantly receive streaming data on your vehicles vital information.
|
| Application |
Part Number |
| i-Cruising | 407-A921 |
|
Apexi Super Ground System
Developed using innovative new concepts, the new A'PEXi Super Grounding System stabilizes electrical noise and voltage spikes. The Super Ground System maximizes electrical component efficiency by combining an electrical grounding system with a battery current and voltage stabilization control unit. The control unit features an electrical charging system and electrical noise filter. The double noise filter smoothes turbulent electrical current, providing a stable and consistent voltage flow to all your vehicles electrical devices. The A'PEXi Super Grounding System maximizes the efficiency of all factory vehicle electrical systems, allowing smoother engine operation, more efficient electrical component operation, and improved electrical current. The stylish voltage stabilizer box compliments any engine bay with its attractive case design and ominous backlit A'PEXi logo.
|
| Application |
Part Number |
| Super Ground System | 477-A903 |
|
Apexi ERO Flasher
Ever wanted that night time drift look where the drivers make their headlights strobe different patterns as they blaze by in a mountain of white smoke and rubber? Well this is the part for you. With up to 9 adjustable settings, the A'PEXi ERO Flasher is inspired by GT Racing in Japan where instead of horns the drivers use their headlights to signal to one another. Working with your stock setup, installation is simple to use and adjustment just a turn of a blue LED lit knob. |
| Application |
Part Number |
| ERO Flasher | 478-A901 |
|
|
09.02.10
Image In Motion will be closed Saturday September 4, 2010 due to the labour day long weekend.
07.01.10
-Image In Motion will be closed for the Canada Day long weekend from July 1st - July 3rd. Have a happy Canada Day everybody!
09.17.09
-TiTek items have been added to our lineup. Check out their vast selection of carbon fiber goods and engine parts for the all new GT-R
09.12.09
-The entire Tanabe lineup has been added to our site. Top quality suspension and exhaust products from Tanabe are now available!
08.13.09
-Big changes in the forefront for Image In Motion. Within the next few weeks, we will be working on having our site fully phresh with new content, specials and the latest happenings here.. so please stay tuned and get to exciting (inside joke for Fit owners)
06.30.09
-Samco Sport Hoses have been added to our lineup. Keep your car cool this summer with the leading brand in coolant hoses.
06.23.09
-Hybrid Racing products have been added to our site for those k-swap enthusiasts. Please stay tuned for IIM K-Swap corner soon to come :P
06.04.09
-Brian Crower products have been reduced in pricing, check out their full line of camshafts and engine parts.
|
