20°F (6.7°C) temperature decrease compared to using only the stock transmission cooler
Direct fit with no cutting or modification to the vehicle
19-row stacked-plate oil cooler is front mounted for maximum airflow
Mounting brackets include provisions for aftermarket horns
Works in conjunction with the stock transmission cooler
Works with the Mishimoto engine oil cooler kit
Cooler available in Sleek Silver or Stealth Black
*Adds approximately 1 qt of transmission fluid
Mishimoto Lifetime Warranty



TECH SPECS



Mishimoto Automotive, the world leader in performance cooling products, is proud to introduce you to the CVT transmission cooler for the 2015+ Subaru WRX. Features include...

Temperature Drop
20°F (6.7°C)

Purchase Includes
(3) Application-Specific Mounting Brackets
(1) 19-Row Oil Cooler (Silver or Black)
(2) 6' Rubber Transmission Hose, 3/8” I.D.
(2) 45° -10AN to 3/8” Barbed Push-On Fittings
(4) Worm-Gear Clamps
(1) Mounting Hardware Set
Mishimoto Lifetime Warranty

Note
This will add approximately 1 qt. of CVT transmission fluid. The transmission fluid is called “HT CVT Fluid” and it can be purchased at any Subaru dealer. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft/lbs (operating range). Do not exceed the maximum torque rating of 35 ft/lbs.Increase in Transmission Fluid Capacity
1 Quart (0.95 L)

Engine Codes
FA20DIT

Chassis Codes
VA

Fits
15+ Subaru WRX

Caution
It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, click here to contact us.

PRODUCT ENGINEERING


DESCRIPTIONThe CVT transmission in the 2015+ Subaru WRX is an impressive system, providing smooth and seamless gear changes with the pull of a lever. However, overheating the transmission fluid can cause early component failure, especially for those interested in racing their WRX or even towing a small trailer. Mishimoto has just the solution for any high-stress situation you can throw to your CVT-equipped WRX. Mishimoto started by placing a large 19-row oil cooler in the front of the vehicle, where it gets the most amount of airflow. The Mishimoto oil cooler kit is designed to work with the stock transmission cooler, creating a system that is ready for any challenge. When installed, the Mishimoto engineers put the transmission cooler through a series of rigorous tests, including driving the vehicle, fully-loaded with occupants and supplier, up a steep grade to measure the efficiency of the 19-row oil cooler. Mishimoto engineers saw consistent 20°F (6.7°C) drops in transmission fluid temperatures, with temperature decreases even during normal driving. If you drive your CVT WRX hard on the racetrack or street, the Mishimoto CVT Transmission cooler is a must! Mishimoto engineers thought of everything with this simple and easy-to-install kit. The application-specific mounting brackets feature mounting holes for popular aftermarket horns. The rubber lines are pre-cut to length and fit with your stock transmission fittings. All of the necessary hardware and clamps are supplied, making this installation simple. The oil cooler is available in either Sleek Silver or Stealth Black to suit your taste. As with all of our products, this kit includes the Mishimoto Lifetime Warranty.

LIFETIME WARRANTY


Mishimoto Performance (MP), warrants all of its products under its 'no questions asked' limited lifetime warranty policy. Regardless of the defect in product, Mishimoto will replace the original product. Warranty claims must be accompanied by the original sales receipt from an authorized dealer.

A trained professional should install all MP products. Any issues with compatibility or installation should be addressed before attempting to install the product.

The purchaser's remedy for breach of this limited warranty, exclusive of all other remedies provided by law, is expressly limited to repair or replacement of any part or parts. All products returned for warranty consideration must be returned to MP with all transportation expenses prepaid.

MP shall not be responsible for damages to its products or injury to persons using the products in any manner that would constitute improper operation, including but not limited to: incorrect opening of radiator pressure caps, burst hoses, unintended application or usage not intended by MP, negligence, improper installation, or any other use that may cause damages or injury. MP shall not be responsible for injury or harm to persons or property when caused by persons or vehicles using its products.

Accident Protection

Mishimoto, under its no questions asked warranty policy, will provide a warranty for all claims including vehicles involved in accidents. Warranty claims must include pictures of the accident and an official police report, and must be within three months of the accident.

Fitment Disclaimer

All Mishimoto products are engineered to fit with OEM applications, as well as other Mishimoto products.

Mishimoto will not be held responsible for fitment issues caused by attempted installation of additional aftermarket parts. This includes, but is not limited to, performance parts and any other non-OEM replacement parts. Fitment with different brands cannot be guaranteed.

Furthermore, Mishimoto will not be held responsible for fitment issues caused by an accident. Many times, clearances needed for installation are very strict. If a vehicle has been involved in a front-end accident, available space for a product such as a thicker aluminum radiator may be compromised.

For all warranty claims, please contact us.